Pacific Interior Wall Mounted Pacific Wall Sign Explain drawing Pacific Interior wall panels are available in six standard widths: 157, 231, 317, 445, 605 and 861mm Other widths are not available as this would require significant investment in new moulds. The assortmnet offers a number of standard heights: 29, 61, 93, 125, 157, 221, 317, 445 and 605mm wall panels are also available in XY sizes so that demands from customers can be met: Min: 125 x 157mm, Max: 605 x 861mm Pacific Interior Suspended PacificSuspended Suspended signs are constructed out of two wall signs and a suspension set. The suspension set consists of wire, screws and end clips (double-sided end clips that lock the two wall rails together) Note that the maximum weight is 12.5 kg (= 27 modules) Pacific Interior Paperflex Door Sign Pacific Paperflex Door Sign Paperflex door signs are available in three sizes.: 61 x 157mm 93 x 157mm 57 x 157mm Explain drawing: Backplate is injection moulded Front can be delivered as clear or matt. Frame members are an intergrated part of the backplate Pacific Interior Paperflex A4 and A3 Pacific Paperflex A4 and A3 Explain drawing: Backplate of aluminium Clear or matt acrylic cover Frame members are an intergrated part of the backplate Six sizes are available.: A4 portrait or landscape A3 portrait or landscape Letter format (US size) Tabloid format (US format) XY size is possible, but expensive if quantity is low due to large start-up cost in production Pacific Interior Monolith Pacific Monolith Monoliths are available in two sizes: 1821 x 445 mm (57 modules) 1821 x 605 mm (57 modules) Explain drawing - a monolith consits of.: foot steel frame top cover side cover wall rails Panels and frame members must be ordered seperatley Pacific Interior Table Support Pacific Table Support Table support are available in three sizes.: 93 x 157mm 157 x 157mm 317 x 317mm Explain drawing: The table support is constructed from a bent aluninium plate, which is painted and mounted with wall rails. Panels, frame-members and end clips must be ordered seperatley. Pacific Interior Projecting Sign Pacific Projecting Sign Projecting signs are available in two sizes.: 157 x 157mm 221 x 231mm Explain drawing: Basically two signs put together on a projecting fitting. Note that a small piece of each wall rail has been cut away in order to make room for the projecting fitting. Pacific Interior Table Sign Pacific Table Sign The table sign is constructed with an injection moulded backplate with intergrated foot and is therefore only available in one size: 61 x 157mm The panel on the backplate can be either Paperfelx panel (clear or matt acrylic cover) or permanent panel Pacific Interior Free / Occupied Function Pacific Free / Occupied Function There are only two types of Free / Occupied indications in the assortment: an injection moulded indicator, which is mounted in the wall rail instead of the end clips a slider panel 29 x 157mm with free / occupied indicator Both types are available with Red / Green foil standard Pacific Interior Floor Stand Pacific Floor Support The floor support is available in 2 sizes, they have the same height, but different diameter on the foot (depending on the size of the sign) “Small” floor support = Max. Sign 605 x 605mm “Large” floor support = Max. Sign 861 x 861mm Note: The mounting plate is delivered with wall rails including frame member clips. Pacific Exterior Post and Panel Pacific Post and Panel The Pacific Exterior assortment has a large number of panels in the five standard widths ranging from 30 to 1800mm in height. The panels can also be delivered in various XY - sizes, so that customer needs can be met: Max panel height = 2450 mm for 600, 900 and 1200mm width Max panel height = 1470mm for 1500 and 2100mm width panel width 1500 and 2100 mm can only be delivered in max. 1470mm height because of the sizes of the panel plates from the sub-supplier (2500 x 1500mm) Pacific Exterior Post and Panel Pacific Post and Panel Post and panel sign is a single post and sign with a visual clearance from the ground to the bottom part of the sign Standard clearance: 500, 750, 1000, 1500, 2000mm No XY options Standard width: 600, 900, 1200, 1500 and 2100mm No XY options Optional heights: Maximum height depending on clearance, width and wind load. Pacific Exterior Monolith Pacific Monolith A monolith is basically a Post and Panel sign without clearance. Instead the panels go all the way down and end with a cover plate (144 mm high) Monoliths are available in the same five standard widths as Post and Panel signs: 600, 900, 1200, 1500 and 2100 mm Pacific Exterior Picto Panel Pacific Picto Panel on Single-Sided Post The assortment of Pacific Exterior also consisits of pictogram panels, which are 3 mm thick rolled panels. Pictogram panels do not have to match the 30mm module, because the welding bolts on the rear side are always positioned on the same spot without regard to the panel size. Pictogram panels on single-sided post can be mounted on concrete foot ground sleeve Pictogram panels for single-sided signs are available in three standard sizes 300 x 300, 450 x 450mm and 600 x 600mm XY options up to 900 x 600mm post for mounting is available with two standard clearances: 500 + 2000mm XY option according to Order Manual Pacific Exterior Picto Panel Pacific Picto Panel on Double-Sided Post Pictogram panels on post can also be mounted as double- sided signs. Two Mounting options are: concrete foundation ground sleeve Pictogram panels for double-sided signs are available in three standard sizes 300 x 300, 450 x 450mm and 600 x 600mm XY options up to 900 x 600mm Post for mounting is available with two standard clearances: 500 + 2000mm XY option according to Order Manual Pacific Exterior Picto Pane Pacific Picto Panel Wall mounted pictogram panels are available in four standard sizes 225 x 225mm 300 x 300mm 450 x 450mm 600 x 600mm XY options up to 900 x 600mm Pacific Exterior Picto Projecting Panel Pacific Projecting Picto Panel Projecting pictogram panels are available in three different sizes 300 x 300mm 450 x 450mm 600 x 600mm No XY options Pacific Exterior Wall Sign Pacific Wall Sign Wall signs are available in five standard widths: 600, 900, 1200, 1500 and 2100mm The wall signs have a minimum height depending on the width. The minimum height is determined by the design and the issue of stability. The wall fittings have a maximum height of 2400mm, but if larger signs are required you can mount several wall fittings in conjunction with one another. Infinity Floor Stand Infinity Floor Stand Same floor support as for the other Interior sign systems. The difference lies in the type of mounting plate Explain drawing: Mounting plate for Infinity consists of two grids with a spacer between them. One acts as a mounting plate on the floor support and the other grid acts as a normal grid on which the panels are mounted Mounting plate sizes: Min 123.825 x 114.3mm Max 628.65 x 628.65mm Infinity Table Sign Infinity Table Sign Basically the same construction as the table stand. The difference lies in the foot, which is not visible from the front and has another gradient Explain drawing: Max height with 1 foot = 152.4mm Max height with 2 feet = 304.8mm Max width = None - see Product Information for guidelines on how many feet are needed for each width Note: Distance between each foot must be max 304.8mm Distance from foot to closest edge must be max 76.2mm Infinity Table Stand The table stand is constructed the same way as the projecting sign . Explain drawing: Max height = 304.8mm Max width with 1 foot = 152.4mm Max width with 2 feet = 304.8mm Infinity Suspended Sign Infinity Suspended Sign Explain drawing: As Infinity is a very heavy sign system (due to the grid in steel) there is a limitation in the maximum size of the sign: With 1 wire set max. Panel surface is 0.64 sqm With 2 wire sets max. Panel surface is 0.96 sqm Note: The Spacer (which is mounted between the two grids) must be placed with a distance of no more than 304.8mm between each. Infinity Projecting Sign Infinity Projecting Sign Projecting signs are limited in width to 228.6mm. There are no limitations in height, but there must be a projecting fitting for each 304.8mm Note: Mag Tabs cannot be used on projecting signs (due to the risk of panels falling down, if they get a light push) Use lock tabs only for projecting signs. Infinity Wall Sign Infinity Wall Mounted Sign The maximum size of the wall mounted sign is limited only by the size of the grid as the panels can be placed outside the grid. Backplate.: Min: 38.1 x 38.1, Max: 800.1 x 1828.8mm Panel: Min: 19.05 x 38.1, Max: 609.6 x 971.55mm Messenger Interior Wall Mounted Messenger Wall Sign Wall signs can be made in a number of sizes: Widths: 157, 231, 317, 445, 605 and 861mm Other widths are not available as this would require significant investment in new moulds. For width 157mm 1 wall rail is required For widths 231, 317 and 445mm, 2 wall rails are required For widths 605 and 861mm, 3 wall rails are required Heights: Min : 2 modules (61mm); Max: 90 Modulex (2877mm) Min. And Max. Sizes correspond to the available assortment in wall rails. If there is a situation where higher signs are necessary, several wall rails will have to be positioned manually under each other. Messenger Interior Paperflex Door Sign Messenger Paperflex Door Sign Paperflex door signs are available in three sizes.: 61 x 157mm 93 x 157mm 57 x 157mm Explain drawing: Backplate is injection moulded Front can be delivered as clear or matt Frame members are an intergrated part of the backplate Messenger Interior Paperflex A4 and A3 Messenger Paperflex A4 and A3 Explain drawing: Backplate of aluminium Clear or matt acrylic cover Frame members are an intergrated part of the backplate Six sizes are available.: A4 portrait or landscape A3 portrait or landscape Letter format (US size) Tabloid format (US format) XY size is possible, but expensive if quantity is low due to large start-up cost in production Messenger Interior Monolith Messenger Monolith Monoliths are available in two sizes 1821 x 445 mm (57 modules) 1821 x 605 mm (57 modules) Explain drawing - a monolith consits of.: foot steel frame top cover side cover wall rails Panels and frame members must be ordered seperatley Messenger Interior Table Support Messenger Table Support Table support are available in three sizes.: 93 x 157mm 157 x 157mm 317 x 317mm Explain drawing: The table support is constructed from a bent aluninium plate, which is painted and mounted with wall rails. Panels, frame-members and end clips must be ordered seperatley. Messenger Interior Table Stand Messenger Table Sign The table sign is constructed with an injection moulded backplate with intergrated foot and is therefore only available in one size: 61 x 157mm The panel on the backplate can be either Paperfelx panel (clear or matt acrylic cover) or permanent panel Messenger Interior Suspended Messenger Suspended Suspended signs are constructed out of two wall signs and a suspension set. The suspension set consists of wire, screws and end clips (double-sided end clips that lock the two wall rails together) Note that the maximum weight is 12.5 kg (= 27 modules) Messenger Interior Floor Support Messenger Floor Support The floor support is available in 2 sizes, they have the same height, but different diameter on the foot (depending on the size of the sign) “Small” floor support = Max. Sign 605 x 605mm “Large” floor support = Max. Sign 861 x 861mm Note: The mounting plate is delivered with wall rails including frame member clips. Messenger Interior Projecting Sign Messenger Projecting Sign Projecting signs are available in two sizes.: 157 x 157mm 221 x 231mm Explain drawing: Basically two signs put together on a projecting fitting. Note that a small piece of each wall rail has been cut away in order to make room for the projecting fitting. Messenger Exterior Monolith Messenger Monolith Monoliths are available in the same standard widths as Pacific signs: 600, 900, 1200, 1500 and 2100 mm Messenger Exterior Wall Sign Messenger Wall Sign Wall signs are available in five standard widths: 600, 900, 1200, 1500 and 2100mm The wall sign in Messenger Exterior is extremely thin. The thickness from wall to panel is only 28mm. Messenger Exterior Picto Panel Messenger Picto Panel on Single-Sided Post The assortment of Messenger Exterior also consisits of pictogram panels, which are 3 mm thick rolled panels. Pictogram panels do not have to match the 30mm module, because the welding bolts on the rear side are always positioned on the same spot without regard to the panel size. Pictogram panels on single-sided post can be mounted on concrete foot ground sleeve Pictogram panels for single-sided signs are available in three standard sizes 300 x 300, 450 x 450mm and 600 x 600mm XY options up to 900 x 600mm post for mounting is available with two standard clearances: 500 + 2000mm XY option according to Order Manual Messenger Exterior Picto Panel Messenger Picto Panel on Double-Sided Post Pictogram panels on post can also be mounted as double- sided signs. Two Mounting options are: concrete foundation ground sleeve Pictogram panels for double-sided signs are available in three standard sizes 300 x 300, 450 x 450mm and 600 x 600mm XY options up to 900 x 600mm Post for mounting is available with two standard clearances: 500 + 2000mm XY option according to Order Manual Messenger Exterior Picto Panel Messenger Picto Panel Wall mounted pictogram panels are available in four standard sizes 225 x 225mm 300 x 300mm 450 x 450mm 600 x 600mm XY options up to 900 x 600mm Compass Exterior Leg Survey Compass Leg Survey All legs are made of extruded aluminium O44 is used for parking signs and suspended signs O66x66 is used for Post and Panel signs and can also be delivered and prepared for the light (mounting of light cap on top of panels) O70 is used for single post signs (projecting or centre panels) and Post and Panel signs (also for light cap) O90 for Post and Panel signs (1, 2 or 4 tracks - depending on sign configuration) - 1 track can also be delivered prepared for light ID 175 for Post and Panel signs - can also be delivered prepared for light ID 250 for Post and Panel sign - three different types depending on sign height and installation method Note: The posts can be combined -eg. O70 and ID 175 on the same sign (in such a case max. Height is dictated by the weakest post (O70)) O70, O90, Id175 and Id250 (type 1) can be mounted with concrete foot or ground sleeve See Product Information/Compass/Wind Load for Compass for information about maximum heights etc. Compass Exterior Post and Panel Sign Compass Post and Panel Sign The posts can be of the same type (eg. 70mm) or of different types (eg. 90mm and Id175) Note: That if different types of posts are used, the maximim height is determined by the post with the smallest diameter The maximum size of a sign depends on: Width Type of post and installations method Clearance between panels and ground Actual wind load Compass Exterior Projecting Sign on Post Compass Projecting Sign on Post Projecting sign on post consists of: Panel Sleeve O70 post and ground sleeve There are a number of Standard sizes available: Height: 100, 120mm Width: 400, 600 and 800mm Projecting panels on post are also available in XY sizes so that all demands from customers can be met: Min: 100 x 100: Max: 120 x 800mm